Your Best Choice for AC Geothermal & Furnace Repair in Springfield, MO

Geothermal maintenance

Fall tune up on a furnace to insure everything is firing on all cylinders for the upcoming winter season.

Performed annual heating maintenance inspection to ensure proper gas heating operation

Ptu

Conducted a comprehensive annual safety and maintenance inspection on the gas furnace and split system heat pump. This involved a thorough examination of the furnace's burners, heat exchanger, and air flow systems to ensure optimal performance and safety. The split system was also inspected, focusing on the indoor and outdoor units, refrigerant levels, electrical connections, and overall efficiency. Additionally, the geothermal heat pump system was evaluated, including the ground loop, heat exchanger, and the control system. All components were tested, cleaned, and lubricated as necessary. Any issues were identified and addressed to maintain peak operational standards and energy efficiency.

Heat pump maintenance

Gas furnace maintenance

Replace floor heat stat

Upon arrival, I began by replacing the return air filters with high-quality shop supply filters to ensure optimal air quality and system efficiency. I then conducted a thorough annual safety maintenance inspection on the upstairs heat pump, air handler system, and the main gas furnace. This included checking the air handler for any signs of wear or damage, and ensuring the gas furnace was operating efficiently. All systems passed inspection, and I verified that each component was functioning correctly. I also took the time to check electrical connections, and ensure all safety features were operational. The systems are now running smoothly, and the air quality has improved significantly.

Furnace safety, and operational check up

Annual gas furnace maintenance and safety inspection with quoted repair options

Conducted a comprehensive heating maintenance inspection on a 90% efficient furnace. The inspection began with a thorough visual examination of the furnace components, including the burners, heat exchanger, and blower assembly. I checked for any signs of wear, corrosion, or damage that could affect performance. Next, I assessed the electrical connections and controls to ensure they were functioning correctly. The furnace filter was removed and inspected for dirt and debris accumulation. A new, high-quality filter was installed to optimize airflow and improve efficiency. I also tested the thermostat to verify accurate temperature readings and responsiveness. Finally, I cleaned the furnace interior, removing any dust or buildup that could hinder operation. The system was tested to confirm proper ignition, stable flame, and adequate heat output. The job was completed to ensure the furnace operates safely and efficiently throughout the heating season.

Heating options, hot water options, Total home Comfort and peace of mind with water leak notification.

Upon arrival, I conducted a thorough inspection of the heating system. The thermostat was not communicating with the control board, preventing the system from receiving a heat signal. I began by examining the thermostat settings and ensuring it was set to the correct mode and temperature. Next, I checked the wiring connections between the thermostat and the control board, ensuring they were secure and free from damage. After confirming the wiring integrity, I tested the thermostat's functionality using a multimeter to verify it was sending the appropriate signals. Upon discovering the issue, I replaced the faulty thermostat with a new one, ensuring it was properly configured and calibrated. I then tested the system to confirm the new thermostat was effectively communicating with the control board, restoring proper heating functionality. Throughout the process, I maintained clear communication with the client, explaining each step and ensuring their satisfaction with the resolution.

Performed an annual heating maintenance inspection

Boiler installation

Service program

High efficiency gas furnace repair and safety check

Replace floor heat stat

Water steam generator

PTU and boiler inspection

A comprehensive refrigerant system check was performed, starting with a detailed inspection of the entire system. Utilizing an electronic leak detector, I meticulously searched for any potential refrigerant leaks. This involved systematically examining all components, including the evaporator, condenser, and connecting tubing.

A thorough inspection and maintenance service was performed on the heating and air-conditioning systems, focusing on both electric heat and heat pump units. The inspection began with a detailed visual examination of all components, ensuring no visible damage or wear. Each system was tested for proper functionality, including thermostat responsiveness and airflow efficiency. Safety checks were conducted on electrical connections, refrigerant levels, and overall system integrity. Operational diagnostics were performed to identify any potential issues, ensuring optimal performance and energy efficiency. The service concluded with a comprehensive report detailing findings and recommendations for future maintenance.

Heating inspection

Gas furnace maintenance inspection